When talking green, people naturally tend to focus on vehicles, but the fact is vehicle emissions have nowhere near the impact that the building industry does.
Buildings and homes use more energy and are responsible for over 35% of all man made greenhouse gases and energy used worldwide. By “greening” every structure with existing technologies and techniques, the world would see a reduction in CO2 by over 1,800 megatons per year. That is equal to the amount of CO2 released by all planes and vehicles in North America last year.
With energy cost rising at a steady pace, energy efficiency renovations are the most cost effective ways to green a home or building, even more so than investing in alternative energies. Increasing efficiency does not have to be a daunting task, there are plenty of quick and easy things you can do which are not very involved. Below is a list of 10 things you can do to increase your efficiency and they are listed from cheapest and easiest to more expensive and involved.
10 steps to Energy Efficiency:
1. Reduce Phantom Loads – phantom loads are those unforeseen “standby” electrical loads that rob about 11% of annual energy consumption. Most electrical products have standby electrical loads which use electricity even when the product is turned off. DVD players, TV’s, Computers, phone chargers, and many other products all use electricity on a constant basis. The solution is to plug these things into surge protector strips and turn the strip off when they are not in use.
2. Seal Up Leaks – Air infiltration is a major cause of increased energy usage. When a structure is not properly sealed, heat will be lost during the winter and gained during the summer, driving up heating and cooling cost. The solution is to perform a pressurization test to locate air leaks and use some sort of caulk or silicon sealant to seal the air leaks in your walls and ceilings.
3. Weatherize – Weatherizing is very similar to sealing air leaks, however, it is different in that it is applied to moving parts such as doors and windows where a caulk type sealant will not work. Weatherizing doors and windows require special products such as v-channel, foam strips and sweeps. For a more detailed tutorial about sealing and weatherizing your home or business, check out “Air Leaks & Energy Exchange” over at NeutralExistence.com.
4. Change Lights – Inefficient lighting is responsible for not only wasted electricity, but added heat gain. The incandescent light bulbs of yesterday are slowly being phased out to more energy efficient Compact Florescent bulbs and LED lightbulbs. A new energy efficient CFL bulb can save about 150 kWh of electricity annually and save you approximately $37 over the life of the bulb. LED lightbulbs, although more expensive up front, will last much longer than CFLs and use less energy as well.
5. Control Radiant Heat – Radiant heat is the most efficient form of heat transfer and in order to increase a structures heating and cooling efficiency, radiant heat transfer must be stopped. Radiant heat is responsible for excess heat gain in the summer and heat loss in the winter. The only way to stop radiant heat transfer is by using a radiant barrier which is a sheet of low emisivity, high reflectivity foil. Although radiant barriers come in many shapes and sizes, but be sure to find a well made, durable, two sided (for winter and summer protection), perforated radiant barrier. I highly recommend Ra-flect radiant barrier as a cost effective quality product (www.raflect.com).
6. Increase Water Efficiency – Massive amounts of energy are used to treat and move potable (drinkable) municipal water, so reducing water usage very energy efficient. There are a variety of things you can do to reduce your potable water usage such as using low flow faucet and shower fixtures, taking shorter showers, only running dishwashers and washer machines when they are full, not leaving the water running needlessly and using water banks in toilet tanks to reduce water used to flush toilets.
7. New Insulation - Insulation retards the passage of convective and conductive heat and is rated in R-values, which is the measure of the rate that heat energy is transferred through a material. If your insulation has been pressed down over the years or the R-value is not the proper value for your location, re-insulating your home is well worth the expense. In order to choose the most efficient insulation for your home or building check out the Energy Star website to find out: www.energystar.gov
8. Window Renovation – Windows are generally the most significant energy sink in almost every structures due to lack of insulation. Windows come in a variety of configurations such as single pane (not efficient), double pane, gas filled, mirrored, etc.. In cooler climates gas filled double pane windows with high R-values are excellent and well worth the cost of replacing old single pane windows. In hotter climates, these same windows are not as effective as they only reduce convective and conductive heat gain but fall short in stopping radiant heat gain. Stopping radiant heat gain in hotter climates requires exterior shading elements or the use of an energy film which helps to block the suns UV rays. Window energy films are applied directly to the glass with soap and water and will essentially make an existing window perform like that of an energy star rated double pane gas filled window.
9. Energy Star Products – Energy star is a governmental rating system which gives its seal to products, buildings, homes and devices which meet minimum requirements of energy efficiency as compared to the norm. When buying new devices such as refrigerators, washer machines, dishwashers and home electronics be sure to purchase products with the Energy Star seal as they will use less electricity than their competition. For more information about energy star and there rating system please see their website (www.energystar.gov).
10. Build Green – In order to increase your energy efficiency build green instead of buying an already made home or business. The benefits of having an architect design a green home or business for you are too many to count. Some benefits of building green include increased energy efficiency, better interior air quality, higher resale value, higher rental rates and occupancy rates for businesses and not to mention, you get the house or building that meets YOUR needs, not some generic home or building which may not be sized appropriately.
Efficiency IS greener than green
Anyway way you look at it, there is no getting around energy efficiency if you really want to green your lifestyle. Efficiency does not have to stop at your home or business, the idea of efficiency can be used in every aspect of your life, from shopping for products to driving around town, efficiency is the key to being green,
Adam Beazley is a LEED accredited professional and green architectural designer, who focuses on green, energy saving design techniques. He is also the founder of Neutral Existence, which is an environmental website dedicated to helping individuals green their life and save money in the process. The website has a plethora of tutorials, articles and products to help individuals reduce their energy consumption, entire environmental footprint and reliance on non renewable resources.
www.NeutralExistence.com
